The power specifications of HP OfficeJet Pro 6970printers include power supply, power requirements and power consumption. Review the power specifications for your printer
- Power Supply
The power supply is the Universal power adapter connected internally.
- Power requirements
The input voltage is 100 to 240 VAC (± 10%), 50/60 Hz (± 3Hz), in world wide it is 100 to 240 VAC (± 10%), 50/60 Hz (± 3Hz), in China and India it is 200 to 240 VAC (± 10%), 50/60 Hz (± 3Hz).
The output voltage is +32V/+12V at 468 mA/166 mA.
- Power consumption
The power consumption when printing in 27 watts printing and 5.5 watts when the printer is active and 1.21 watts in sleep mode.
Acoustic Emission Specification
The acoustic emission specification are given below. Review the following information for the OfficeJet Pro 6970 printer.
- The network protocol specifications, print in Draft mode, noise levels per ISO 7779.
- The sound pressure in by stander position is LpAm 55 (dBA) in mono Draft print.
- The sound power is LwAd 6.8 B(A) are the acoustic emission specifications.
Physical dimension
The physical dimension of every printer includes height, width, depth and Weight. The measurements of each and every dimensions are given below. Review the follow the information.
- Height
The height of the printer are 228.67 millimeter or 9.0 inches
- Width
The width of the printer are 463.7 millimeter or 18.26 inches.
- Depth
The depth of the printer are 390 millimeter or 15.35 inches.
- Weight
The weight of the printer with duplexer is 8.1 kg or 17.9 pounds
Regulatory specifications
The regulatory specifications section has the regulatory model number and exposure to radio frequency radiation. Review the following information to know more in detail about the regulatory specification.
- Regulatory model number
The HP OfficeJet Pro 6970 printer is assigned with a regulatory model number for regulatory identification purpose. The regulatory model number is SNPRC-1501-01. The marketing name or printer name should not be confused with the regulatory number.
- Radio frequency radiation exposure
The radio frequency radiation exposure has limits that the radiated output power of the device should far below the FCC. Nevertheless, the device shall be used in such a manner that the potential for human contact during normal operation is minimized. This printer and any attached external antenna, if supported, shall be placed in such a manner to minimize the potential for human contact during normal operation. In order to avoid the possibility of exceeding the FCC radio frequency exposure limits, human proximity to the antenna shall not be less than 20 cm (8 inches) during normal operation.