Disclaimer


We are independent third party service providers who provide guidance and related tips on setting up your printer and downloading & installing software drivers from 123.hp.com/setup . Also, we provide simple fixes for your printer related issues and queries. We are not specifically tied-up with HP and its services in any way nor do we trade any of its products or services. We’ve intended the usage of all the images, logos and content on this website for informational purposes alone. For issues related to service and warranty, contact the manufacturer directly and thoroughly examine our privacy policy.

Close ×

HP OfficeJet 3830 Printers Power Specification

The power specification of the HP OfficeJet 3830 printers are given below. The specification consist of the power supply and input voltage. Make sure that the printer is compatible with the power system in your country/region. Review the following information correctly.

The power supply is the universal power adapter internally and the input voltage is 100 to 240 VAC (± 10%), 50/60 Hz (± 3Hz)

Acoustic Emission Specification

Based on printing in the Draft mode and are measured as noise levels per ISO 7779, the following specifications are given for the HP OfficeJet 3830 printers.

The sound pressure in bystander position is  LpAm 55 (dBA) (mono Draft print) and the sound power is LwAd 6.9 (BA).

Regulatory specifications

The regulatory specifications section has the regulatory model number and exposure to radio frequency radiation. Review the following information to know more in detail about the regulatory specification.

1. Regulatory model number

The HP OfficeJet 3830 printer is assigned with a regulatory model number for regulatory identification purpose. The regulatory model number is SNPRH-1502.  The marketing name or printer name should not be confused with the regulatory number.

2. Radio frequency radiation exposure

The radio frequency radiation exposure has limits that the radiated output power of the device should far below the FCC. Nevertheless, the device shall be used in such a manner that the potential for human contact during normal operation is minimized. This printer and any attached external antenna, if supported, shall be placed in such a manner to minimize the potential for human contact during normal operation. In order to avoid the possibility of exceeding the FCC radio frequency exposure limits, human proximity to the antenna shall not be less than 20 cm (8 inches) during normal operation.

123-hp-printer-support