The trouble shooting of HP LaserJet Pro MFP M130fw printer consists of user guide, updation of firmware, error code message, special support, wired connection and wireless connection. These are the basic troubleshooting on the printer. Review the information and get your printer issues resolved.
- User manual
Get the user manual for your printer to know about the usage and troubleshooting information for your HP LaserJet Pro MFP M130fw printer.
The user guide is available in the printer software installation CD. You can also download it from the hp.support.com and enter the printer model number on the search box.
Click the user guide to get the user manual. You can also choose the language accordingly.
- Updation of Firmware
Click the user guide to get the user manual. You can also choose the language accordingly.
Select your device’s operating system and click Next button.
Select the Firmware and click Download.
- Error code message
If you see the error code Er/o1 and the attention light is blinking, take an action of loading the paper into input tray.
- Extra support
Visit hp.support.com to get all inclusive help for the printer such solve issues, find advanced configuration information, software update, support forums, warranty and regulatory information and many more.
- Wired connection
Check whether the printer is connected to the correct network port using the cable. Check whether the lights next to the network port are lit. Check whether the printer drivers are installed and test the network connection.
Click Start → Run. Type cmd and press Enter. Type ping, type space and type the printer IP address and press Enter.
See “find the printer IP address” to know your printer’s IP address, if you are using Windows operating system
type the IP address in the ping pane after opening the network utility and press Enter. See “find the printer IP address” to know your printer’s IP address, if you are using other operating systems.
- Wireless connection
Check whether the USB cable is disabled as the printer will not connect to the wireless network if a network cable is connected. Check whether your printer and router are switched on and are ready. Make sure the wireless switch is also turned on.
Keep the printer within the range of the wireless network that is the printer must be within 30 m of the wireless access point.
Check whether the print driver is installed on the computer. Connect the printer on the same wireless network as the computer.
If you are using Mac operating system, make sure that the wireless router supports Bonjour. Restart the wireless router.