123 HP LaserJet Pro M102w Printer User Manual

HP LaserJet Pro M102w Printer User Manual

The hardware setup, setting your preferences, connection method setup, software installation, mobile printing capabilities and HP ePrint settings for the HP LaserJet Pro M102w are provided here. Review the following information to know about the usage of HP LaserJet Pro M102w printers.

1. 123 HP Printer Setting up the Hardware

Unbox the printer and remove the packing materials like tapes, stickers and other packing materials from the printer. All the packing materials such as packing materials inside and outside of the printer should be removed. The protecting film covering the control panel should also be removed.

The input tray door should be opened to pull the paper width guide as far as possible. A maximum of 250 sheets of paper facing up the print side can be inserted into the tray. In case of pre-punched paper, the paper holes should be on the tray’s left side.

Do not push the paper width guide so tightly instead, slightly slide. Pushing them tightly may result in binding against the paper.

Close the input tray door, if you have loaded A4 or U.S letter-size paper. If you have inserted U.S legal size or large paper, do not close the input tray door.

Disconnect the USB cable if you have connected the printer to computer using the USB cable. Connect one end of the power cord to the rear of the printer and other end of the power cord into an electrical outlet.

Switch on the printer. Select your country/region and language on the printer control panel and select the date and time if prompted. Press OK and your HP printer hardware setup is completed successfully.

2. 123 HP Printer Connection method

You can choose either wired or wireless network to connect your printer. Select any one connection method and follow the steps given below to connect your printer on a network which helps to access the web services.

123 HP Printer USB connection

While connecting to the USB connection method, the USB cable should be disconnected. On your Windows computer, choose the network connection method as USB

When the installer prompts you to connect the USB cable, connect it to your printer. Follow the steps given software installation and download the printer software easily.

Connect the USB cable to the printer and computer before the software installation and continue, if you choose the USB be connection method on your OS X

123 HP Printer Wireless connection

you must connect the printer to a wireless network to setup a wireless connection. Check whether the printer and computer are turned on .

connect the printer and computer on the same wireless network. Follow the steps given on the software installation and complete the setup. If you smart devices like mobile phones or tablets, follow the mobile printing solutions.

123 HP Printer Wired network connection

A network cable is needed to connect your printer to on a wired network. The network address for your printer may obtained in some time. Connect to the wired network and follow the instructions given on software installation to utilise the HP Web services and regular updates.

123 HP Printer Software Installation

The Software for HP LaserJet M102w printer can be downloaded from the installation CD that comes with your printer.

You can also download it from the web site 123.hp.com or download HP Easy Start

Download the printer software by using HP website or HP Easy Start or from your installation CD that is shipped along with the printer.

On your Windows or OS X, download the HP Easy start and go to 123.hp.com to download the printer software.

Follow the onscreen instructions and save the file on your computer. The software can be launched by running the file with an extension .exe and install it.

Download the software from hp.support.com. enter your printer model. Select the software and driver tab and click Go. Download the full feature driver or basic driver and launch the software file from the Downloads folder.

Use the printer driver installation CD on your Windows computer. Insert the CD in the computer’s CD drive and follow the instructions that appear onscreen to install the software.

3. 123 HP Mobile printing setup

123 HP Printer Wireless network connection

Mobile printing can be used on wireless network by connecting your mobile devices such as phone or tablet.

On your Apple iOS devices, the file you like to print should be opened and select Action. Select the printer and select print.

On your Android devices with 4.4 or latest versions, the file you like to print should be opened and select the Menu. Select the printer and select Print again. Download the HP AiO Remote app form the Windows store on your Windows phone

123 HP Printer Wi-Fi Direct connection

Connect the mobile devices and your printer without an active internet connection using the Wi-Fi enabled printer. Turn on the Wi-Fi direct from the control panel and follow the given instructions.

Press the setup button on the control panel and open the network setup menu. The Wi-Fi direct menu should be opened to enable the Wi-Fi by touching ON.

4. 123 HP ePrint setup

You can easily print your document from anywhere. Send your files to be printed as an attachment to your printer’s email address. HP ePrint is a web service provided for free by HP with high security.

To setup HP ePrint services in your printer, you need a printer connected on the wired or wireless network which is active and web services should be enabled on your printer. Create an HP connected account to register your printer.

You can use your HP connected account to access your print job, controlling the email address sending mails to your printer and viewing the print queue.

To use the HP ePrint service on your printer, turn on web services on the printer. The printer should be connected to a network. Type the IP address of your network in the web browser. You can find the IP address of your network by reviewing the Find printer IP address in the getting started guide or refer to the user guide.

A webpage will appear if you enter your IP address. Click Enable button after accepting the term and conditions of use.