Follow the below instructions to setup your HP LaserJet Pro M102w Printer to USB connection on your Windows computer. The below given step by step instructions are easy to follow.
After setting up the USB connection, you need to download the printer software to complete the connection setup. Review the below given instructions and implement them to successfully connect your printer on the USB connection.
123 HP Laserjet Requirements
You need to gather some of the requirements that are mandatory to setup the network connection and install the software. The requirements are turning on the computer and printer.
Make your printer and computer in a ready state. An USB cable with 3 meters length is needed. The USB hub or the docking station should not be connected as it may lead to inefficient power resulting in printer’s dysfunctionality.
The printer software should be uninstalled from the computer. The USB cable should be disconnected during the driver installation. The USB cable should not be connected until the installer prompt you to do so. Search for Devices in Windows and click the Devices and Printer in the search result list.
Click Remove device and right click on the printer. Check whether the printer icons in your computer systems are removed. The Devices and printer dialog box should be closed.
123 HP Laserjet Printer software and driver installation
Download the HP LaserJet Pro M102w printer using the HP Easy Start. Follow the instructions onscreen to complete the software and driver installation. The installation setup will be guided by the HP Easy Start.
Visit the website 123.hp.com and type your printer model number in the search box and click Search. Download the full feature driver or basic driver from the site accordingly. Follow the onscreen instructions after clicking Download. Make sure the operating system detected by the website is correct after checking the system compatibility.
Download hp.support.com if the download fails or your printer is not listed on 123.hp.com . Type your printer model number and click Enter. Select the software and drivers tab in the webpage and click Download. The downloaded file should be executed and the USB connection should be selected when prompted to select the printer connection and finish the setup.