123.hp.com/setup 3637 – HP Deskjet 3637 Printer Setup

Home /

HP Deskjet 3637 all-in-one Printer driver setup instructions and troubleshooting tips.
Get expert assistance on printer troubleshooting and setup from 123.hp.com/setup 3637. We’re only a call away!.The HP Deskjet 3637 is a compact all-in-one wireless printer that will satisfy small-scale printing needs.

It’s quiet and doesn’t take much time or effort to be setup. The printer also became a hit amongst users for its easy maintenance.
Since the printer is wireless, you can also get the benefit of a number of Web Services that let you print documents remotely.

123.hp.com/setup 3637 – HP Deskjet 3637 Specifications

First, open the printer box and remove the manuals and user guides.Then, take the printer out of the cardboard box.
Now, lower the Paper Output Tray on the front panel and use the handle to open the ink cartridge access area.
Take out all the packaging materials and the cardboard inside the printer. Then, set the cardboard box aside for recycling.

First, take the power cord and plug one end into the rear of the printer.
Next, plug the other end of the power cord into the wall outlet.
Press the power button to switch on the printer.
You must wait until the printer doesn’t make any noise to install the ink cartridges.

First, lower the paper tray and open the ink cartridge access area.Once you’ve inserted the cartridges, close the ink cartridge access area.
Take the ink cartridge out of the wrapper and peel away the orange tapes on the copper-coloured contacts.
Next, wait until the ink cartridge access area reaches the center.Open the cartridge lock-lever lid and insert the cartridge into the slot according to its colour.
Next, close the lock-lever lid and insert the remaining cartridge in the same way.

First, raise the Paper Input Tray.Slide the paper width guides away from each other and insert the stack of papers into the tray.
Then, take a stack of plain papers and align them on a hard surface.
Next, adjust the paper width guides such that they touch the edge of the stack while also making sure that it doesn’t fold or damage the papers.
Then, lower the Paper Output Tray and pull out the paper extender.

First, switch on your computer and connect it to the Wireless network.Then, open any browser on your system and go to 123.hp.com/setup 3637.
Make sure that you’ve disconnected all the USB cables from your printer. Once the system has downloaded the software, click on it to open it.
When the system asks you to select the name of your printer, select the “My Printer is not Shown” option.
Next, choose a connection method and select Wireless method.
Then, select Continue to continue with the Installation process.

First, go to HP’s support website and download the HP Print and Scan Doctor.
Then, open the software and select the name of your printer.
Next, click Yes if you see a screen that asks you to update your software drivers.
If the software asks you to set your printer as the default printer, click Yes.
Next, try to print using your Deskjet 3637 printer. If the printer offline issue still persists, continue to the next step.
Set HP Deskjet 3637 as your default printer manually.
If this problem still continues, contact us to get your issue resolved.

Check if you’ve installed genuine HP Ink cartridges. You can go to the HP Anti-Counterfeit website to check if your cartridges are genuine.
Next, check if there is sufficient ink in your cartridge.
If you find any cartridge with less ink, replace it with a new one.
Then, the printers align the ink cartridges and print an alignment page.
Open the scanner glass lid and place the alignment sheet print-side down on the scanner glass.
Close the scanner glass lid and press the Start Copy Black Button.

If your HP Deskjet 3637 Printer refuses to connect to Wi-Fi, follow the steps below.
Check if Wireless Direct is switched on and switch it off.
To switch off or on Wireless Direct you must press the Wireless button and Resume button at the same time.
If the Wi-Fi Direct is turned off you’ll see that the icon in the display is turned off.
You can also connect to the network using USB and then convert the connection to Wireless to see if the system can print.
If the above the step doesn’t solve the problem, then try to download and connect the software using HP Auto-Wireless connect.
If you’re still facing issues with the connection, you must get your printer serviced.

Before you start printing documents using your HP Deskjet 3637 printer, make sure that you’ve loaded paper into the Paper Input Tray.
First, open the document on your system and select Print.Then, check if your printer is selected.
Next, open the Printer Properties Dialog Box.Next, open the Printer Properties Dialog Box.

This dialog box goes by various names like Preferences, Printer, Printer Properties, Printer Setup, or Printer.
Then, select the appropriate options on Printing Shortcuts tabs.Next, click OK to close the Printer Properties Dialog box.Then, click Print to begin printing.

First, load paper into the Paper Tray if it’s empty. Next, open the scanner glass lid.
Then, load the document that you’d like to copy, print-side down on the scanner glass.
Press the Start Copy Black or Start Copy Colour button to get started with the copying process.

If you’d like to take multiple copies, just press the copy button multiple times.
The printer will start the copying job two minutes after the last button press.

Before beginning the Scan process, make sure that you’ve downloaded and installed the full feature software drivers from 123.hp.com/setup 3637.Follow the steps below to scan the document
First, open the scanner glass lid and place the document print-side down. Click Scan on the printer software and select “Scan Document or Photo”

Next, select the type of scan that you require and select Save to save the scan.
You can choose between save as JPEG or save as PDF.
Once the printer has scanned the document, the scanned file automatically opens in the desktop.

Load your document on the scanner glass lid. Next, open the HP Printer software on your desktop.
If you can’t find it on your desktop you’ll have to manually search for it in Programs or Apps, depending on the operating system version that you’re using.

Next, click Scan and then click Scan a Document or Photo.
Then, select the type of scan that you’d require and click Scan.
Lastly, choose E-mail as PDF or E-mail as JPEG from the right tab to open your scanned file in your e-mail.